I-PEX 83021-100B-01-D CABLINE®-SS 40AWG/50Ω series ultra-thin coaxial cable bundle alternative

Confirm the model of the ultra-fine coaxial cable connector by first locking the original material number and structure.

For engineers and purchasing personnel, confirming the model of the ultra-fine coaxial cable connector cannot be solely based on the appearance, color, or pin count of the connector. It is more important to find the complete material number of the original product and check it in combination with the connector structure, Pitch, pin count, and cable specification. The product corresponding to this article is I-PEX CABLINE®-SS 83021-100B-01-D, which is a 32Pin ultra-fine coaxial cable, with a finished length of 300mm, using Micro-Coaxial Cable AWG#40, and wire sequence 1-1. The connector model used at the end of the wire material is 20373-R32T-06, corresponding to the CABLINE®-SS 32Pin Plug Housing. According to I-PEX official data, CABLINE®-SS uses a 0.4mm Contact Pitch and a Vertical Right Angle structure, supporting 10, 14, 20, 30, 32, 35, 40, 50Pin specifications. Therefore, when confirming the connector model of similar cables, it is necessary to first establish a complete model correspondence relationship from "series name + pin count + connector material number + cable specification".

---

The engineer confirms the model, focusing on the pin count, pitch, wiring direction, and installation space.

In actual projects, even if two extremely thin coaxial connectors look similar in size, they may not be directly interchangeable if the pin count, terminal spacing, or mating structure differs. For example, 20373-R32T-06 corresponds to the CABLINE®-SS 32Pin Plug Housing, and the CABLINE®-SS series uses a 0.4mm pitch, vertical (right angle) mating direction, horizontal cable exit, with a mated height of 1.65±0.2mm and a depth of 3mm. These parameters directly affect PCB layout, connector assembly, and the routing path of the cable within the device. For connectors with a 300mm cable length such as 83021-100B-01-D, engineers should also confirm the actual bending radius, routing conditions in tight spaces, and whether the pin positions at both ends are connected according to the original equipment definition. The official product details from I-PEX also introduce the narrow design of CABLINE®-SS, which is suitable for small shafts and other space-limited structures.

---

Purchase confirmation model, cannot only look at the connector, but also check the complete harness parameters

Purchasers are advised not to provide only the information "20373-R32T-06 connector" when inquiring or seeking alternative suppliers, as the connector model does not fully represent a very thin coaxial cable assembly. The complete identification criteria for 83021-100B-01-D also include 32Pin, Micro-Coaxial Cable AWG#40, 300mm, and 1-1 wire sequence. The official I-PEX model list shows that for the same CABLINE®-SS 32Pin, there are both 1-N wire sequence models such as 82887, 82442, 82888, and 1-1 wire sequence models such as 83019, 83020, 83021, corresponding to different lengths of 100mm, 200mm, and 300mm. Therefore, when seeking alternatives, if only "CABLINE-SS 32P 300mm" is written, there is still a risk of selecting the wrong wire sequence. For alternative suppliers, it should also be further confirmed that the connector assembly consistency, Pin position conductivity, wire sequence, wire length, material specification, and batch production consistency are in place. Our company can provide I-PEX 83021-100B-01-D compatible alternative cable assembly solutions and can develop and produce very thin coaxial cable assemblies that are compatible with the original product's connector model, Pin count, material specification, length, and wire sequence requirements.

---

Selection, compatibility, and alternative solutions reference and suggestions

If engineers or purchasing personnel need to confirm the corresponding ultra-fine coaxial cable connector model for I-PEX 83021-100B-01-D, they can check in the order of "Original Part Number → Connector Model → Pin Count → Pitch → Cable → Length → Wire Sequence." For this model, the core conditions can be determined as: CABLINE®-SS series, 32 Pin, 0.4mm Pitch, cable end connector 20373-R32T-06, AWG#40 Micro-Coaxial Cable, 300mm, 1-1 wire sequence. At the same time, it should be noted that the CABLINE®-SS high-speed performance reference test conditions provided by I-PEX are 40 Pin, AWG#40, 45Ω, 100mm, GSSGSSG, so one cannot simply rely on the 16Gbps/Lane data in the series promotion and directly claim that the 300mm 83021 can achieve the same speed in all systems. The actual project should still combine impedance, cable length, connector, PCB, and system SI for verification.

---

The core of connector model confirmation is to establish a complete one-to-one correspondence.
The confirmation of the model for ultra-fine coaxial cable connectors essentially involves a comprehensive check of the mechanical structure, electrical specifications, and cable definition, rather than simply searching for connectors with similar appearances. For the I-PEX 83021-100B-01-D, the core information can be summarized as: CABLINE®-SS, 32Pin, 0.4mm Pitch, AWG#40 Micro-Coaxial Cable, 300mm, 1-1 wire sequence, and cable end connector model 20373-R32T-06. For engineers, it is important to focus on confirming the installation space, pin position, pitch, and high-speed signal requirements; for purchasing personnel, it is crucial to focus on confirming the complete part number, connector model, cable, length, wire sequence, and supplier batch consistency. I am[3W Electronic Components Network]We specialize in providing customized and compatible alternative services for high-speed ultra-thin coaxial cable assemblies such as eDP, MIPI, USB3.X/4, LVDS, etc. If you need technical support, please contact us:Manager Zhang 18913228573 (WeChat same number)By matching these parameters item by item, a more reliable selection basis can be provided for the domestic compatible alternative of the I-PEX ultra-fine coaxial cable assembly.