2026-08-22
I-PEX 82451-100B-02-D corresponds to a 40Pin ultra-thin coaxial cable assembly, therefore the cable end connector needs to match the 40Pin specification 20878-040T-01.
2026-08-22
I-PEX 82676-100B-01-D is a very thin coaxial cable assembly solution belonging to the CABLINE®-UM series 30Pin, 1-1 Pin Assignment, using AWG#40 very thin coaxial wire, with the matching cable end con...
2026-08-22
I-PEX 82675-100B-01-D belongs to CABLINE®-UM 30Pin, 40AWG Micro-Coaxial Cable ultra-fine coaxial cable assembly, with a cable assembly length of 200MM, using 1-1 Pin Assignment
2026-08-22
I-PEX 82674-100B-01-D is a very thin coaxial cable assembly with a 30Pin, 40AWG, 100mm, 1-1 Pin Assignment, and the matching connector for the cable end is 20878-030T-01, the corresponding cable speci...
2026-08-21
I-PEX 82286-100B-02-D, when looking for domestic, second supplier, or compatible replacement cables, it is recommended to first confirm whether the connector end matches 20878-030T-01, and check the 3...
2026-08-21
I-PEX 82187-100B-02-D is a 30Pin ultra-thin coaxial cable assembly solution of the CABLINE®-UM series, using 40AWG ultra-thin coaxial wire, with a cable length of 100mm, and the wire end is equipped w...
2026-08-21
I-PEX 81465-100B-02-D, 40AWG ultra-fine coaxial cable, 200mm length, 1-N wire position definition, and the corresponding relationship with the 20878-030T-01 cable end connector.
2026-08-21
I-PEX 82997-100B-01-D belongs to the CABLINE®-CA II PLUS 60Pin ultra-thin coaxial cable product system, with the wire end connector model being 20680-060T-01, using AWG#40 ultra-thin coaxial
2026-08-21
I-PEX CABLINE®-CA II PLUS features a 0.4mm ultra-fine pitch, 60Pin, high-speed transmission, and ZenShield® full shielding structure. The connector mating height is approximately 0.95mm, designed for ...
2026-08-20
I-PEX 82872-100B-02-D belongs to the CABLINE®-CA II PLUS 60Pin Micro-Coaxial Harness, using AWG#40 ultra-fine coaxial wire, 60Pin, L=300mm, 1
