2024-09-05
When inspecting the wiring harness circuit of the terminal/connector, or when laying wires such as harnesses during assembly of equipment, or after fixing the wiring, if the bonding part of the termin...
2024-09-05
The test specimen shall consist of a plug and an accessible end socket. Unless otherwise indicated, the sample shall consist of all available hardware including rims, hoods, wire clips, screws, guides...
2024-09-05
Key parts of the connector is monopolized by foreign companies, resulting in higher costs, management coordination is more difficult, the host plant lacks the right to speak, and is not conducive to t...
2024-09-05
Compared with circular connectors, rectangular connectors in the utilization of space is higher, chanting is widely used in circuit boards, circuit boards and devices such as the connection between th...
2024-09-05
Power connectors are widely used in a variety of circuits and are used to connect or disconnect circuits. The correct selection of aviation plugs is also an important aspect of improving the reliabili...
2024-09-05
Wiring harness products are widely used in computers, home appliances, instruments, automobiles, machine tools, medical equipment, electronics, industrial automation, and other high-tech electrical pr...
2024-09-05
Processing materials, electronic wire harness processing materials, good or bad, to a certain extent, will directly affect the quality of the harness, while the choice of wire harness materials will, ...
2024-09-05
Wiring harness processing process is generally: open wire (under the material cut wire) → crimping (branch crimping, terminal crimping) → assembly (pre-installation, winding, marking) → conduction tes...
2024-09-05
When wearing the rubber shell often occurs when the terminal off the PIN, this time we should how to solve this problem, in fact, as long as there is a pull back action in each inserted into a hole ca...
2024-09-05
Simply put, automotive wiring harness assembly is the process of wrapping various types of wires into bundles called harnesses. The uniform wrapping protects the insulation and allows for better wirin...
2024-09-05
Harness processing process of its wire must have sufficient strength, if its strength is not enough, so it will be very easy because of some external factors leading to its fracture, such as strong wi...
2024-09-05
Assembling the shell: check that the shell has no scratches, wrongly installed or burrs, etc., that there are no missed parts, and that the screws are not oxidized, loose, screwed, and discolored. If ...
2024-09-05
The basic structural components of industrial power connectors are ① contact parts; ② insulator; ③ accessories; ④ shell.
2024-09-05
A good connector requires a perfect combination of design, equipment and process. At the same time this is a high requirement for equipment supportability, the technical barriers are relatively high.
2024-09-05
The procurement of sma rf connectors, need to take into account the interface mechanism type, electrical performance, mounting method, termination form, material and plating five aspects.
2024-09-05
The number of domestic connector enterprises, but small scale, and mainly to copy foreign products, design capability is insufficient, the test capacity is more I lack of most products are not in acco...
2024-09-05
A connector, generally referred to as an electrical connector, is a device that connects two active devices to transmit current or signals. Connector in the circuit is blocked at the place or isolated...
2024-09-05
In the field of new energy vehicles, high-voltage connector is an important device, which mainly consists of several parts such as contact body, insulator, shell and accessories. As the working voltag...
2024-09-05
In addition to spatial positioning of the terminal by the shell, but also rely on the shell on its holding force to produce the terminal mechanical behavior of the boundary conditions (such as cantile...
2024-09-05
Connector application in the field of consumer electronics, the requirements of connector products are: standardization, high volume, fast replacement. And the requirements of the connector manufactur...
