2024-09-04
Other features of the Molex Lite-Trap connectors include longer wire insulation designed for stable wire positioning to further ensure contact effectiveness, and an innovative wire latch feature to he...
2024-09-04
Molex Incorporated has announced its new SlimStack™ SSB6 SMT miniature board-to-board connector product, featuring ultra-low side height (0.35 mm pitch) and compact dimensions (0.60 mm H x 2.00 mm W w...
2024-09-04
The electric bicycle wiring harness is the blood vessel of the electric bicycle, through which the battery electrical energy is output to the motor, control system, light signal system and auxiliary s...
2024-09-04
The electric bicycle wiring harness also needs your attention to the appearance of the finish. It is recommended that the replacement electronic wire harness must be compatible with the original elect...
2024-09-04
An electric bike wiring harness is the main network of an automobile's electrical circuitry, connecting the car's electrical and electronic components and making them function. No wiring harness, no a...
2024-09-04
Human factor. When the wiring harness is installed or overhauled, damage to the insulation of the wiring harness cable due to human factors, or the wiring harness is installed in the wrong position, o...
2024-09-04
The electric bicycle wiring harness is one of the main parts on the electric vehicle, it is an important part to conduct all the current, voltage and power of the electric vehicle. So we need to make ...
2024-09-04
A complete set of automotive wiring harness consists of nearly 1,000 materials, assembly is complex and difficult, will inevitably cause assembly errors, resulting in rework rework, affecting product ...
2024-09-04
High-voltage wire harnesses such as the need to pass through sharp edges or holes should be designed to protect the structure or way, in the early stages of the development of the entire vehicle when ...
2024-09-04
Although it is not the key to traditional manufacturing, it possesses an integral part. Nowadays, many teachers work with system software natural environments that are more cumbersome and extreme. Be ...
2024-09-04
The size of the PCB can affect the performance of SMD antennas if used directly on a groundable circuit board. However, FPC antennas do not have this problem because they are customized for placement ...
2024-09-04
FPC antennas can be bent so that they can be embedded in small devices like IoT modules, where board space is too large for surface-mounted antennas.FPC antennas can be placed vertically, horizontally...
2024-09-04
The antenna is a device that radiates RF signals from the coaxial cable into the air or receives them from the air onto the coaxial cable, and converts the guided waves spread on the coaxial cable int...
2024-09-04
Driven by the two major trends of the Internet of Things and the mobile Internet, 5G is becoming the center of attention, while the progress about 5G has been driven by individual companies' efforts a...
2024-09-04
Terminal harness, also known as end wires, is actually a kind of wire, a variety of electronic engineers used for power conduction, information transfer and other functions. With the development of el...
2024-09-04
Not as long as the test part of the qualified can know a device is not really fully in line with the use of standards, and at present we live in the use of the connector there is a more common phenome...
2024-09-04
Terminal harness is a circuit to connect the wiring components of the electrical appliances, by the insulating sheath, terminal blocks, transmission lines and insulation layer bundled with raw materia...
2024-09-04
Terminal harnesses are tested for voltage resistance to ensure that the flow of electricity can easily flow from one point to another, and this test will verify the consistency of the cable and its ab...
2024-09-04
The plug of the DC power cord should generally be put into the sunlight and not too damp area for storage, so that the DC power cord is not easy to erosion, if the inside of the copper wire directly e...
2024-09-04
"The composition of the electrical connector" connector by the socket, plug, accessory three parts. Sockets, plugs are used to fix the contacts, plug and connect. Attachment is used to fix the wire, p...
