2024-07-10
Automotive wiring harness manufacturers in China started late, in the wiring harness processing technology is not as sophisticated as foreign automotive wiring harness manufacturers, so the processing...
2024-07-10
Connector degradation mechanisms are very important to connector performance and critical to the performance assurance of related products. What are the degradation mechanisms? What factors contribute...
2024-07-10
With the modern automobile safety, comfort and environmental protection requirements continue to improve, the number of circuits on the car and power consumption increased significantly, so that many ...
2024-07-10
Minefield 1: Using the wrong connector or a defective connector. 2.4 mm connectors should not be mixed with 2.92 mm, 3.5 mm and SMA connectors. Incorrect usage can lead to permanent mechanical damage....
2024-07-10
An electrical connector is a small device used for the safety of household appliances. The electrical connector is fixed to one end of the socket. After the socket is secured to one end by soldering t...
2024-07-10
Automotive wiring harness in the use of the process will often appear broken, torn, disconnected, parts lost, these situations occur will form a car wiring harness wiring due to heat, conflict and acc...
2024-07-10
Robot wiring harness is used for robot system and mobile equipment, production line, robot arm and other occasions, in order to dry or humid indoor environment cable life can be longer, the harness is...
2024-07-10
When connectors are corroded, their service life is shortened and they can also lead to circuit failures. So under what circumstances will the connector be corroded, what are the main factors? Huichen...
2024-07-10
For connectors, non-industry people may be relatively unfamiliar. Here the engineers of Huicheng Yuan Electronics will introduce the basic knowledge of connectors to you. Generally speaking, a connect...
2024-07-10
In the near future, household appliances will become smarter, more efficient and more practical than ever before. Whether it's large appliances and components such as air conditioners, refrigerators, ...
2024-07-10
Insertion and extraction force is a key indicator of the connector, which is directly related to the performance and use of the connector. What is the insertion and extraction force? The insertion and...
2024-07-10
What are the test methods for board-to-board connectors? There are many board-to-board connectors in our life, mainly because it can improve efficiency and save costs; the application needs to underst...
2024-07-10
A connector is a component that electronic engineers and technicians often come into contact with. Its role is very simple: in the circuit is blocked at the place or isolated between the circuit, set ...
2024-07-10
Hitch is an essential part of the automobile wiring harness, and a bad hitch can lead to some strange malfunctions in the car's powertrain, starter, ignition, instrumentation, lights and so on. It is ...
2024-07-10
(1) wire harness burned out fault detection and judgment in the power system circuit, which point of the iron, wire harness burned to where it burned out and intact parts of the intersection, it can b...
2024-07-10
With the continuous development of wireless communication technology, "board-to-board" coaxial connectors are more and more widely used in the interconnection of wireless system modules, such as: comm...
2024-07-10
Connector insulator materials are usually: PBT, NYLON, ABS, PC, LCP and other materials such as Schedule I show, but in principle, the use of flame-resistant materials. a. PBT material: generally used...
2024-07-10
According to the "China Connector Industry Market Survey and Development Strategy Research Report 2017-2021" published by China Market Research, China's connector industry had a market size of $11.362...
2024-07-10
Automotive low-voltage wiring harness is the nervous system of the car, connecting all the electrical equipment on the vehicle, playing the role of power distribution and signal transmission. In order...
2024-07-10
Wiring Harness Processing--The law of wiring harness burning is: in the power system circuit, where the iron, the wiring harness will be burned where, burned and intact parts of the junction, can be c...
