2024-07-10
IP rating is the level of protection of electrical equipment enclosure against intrusion of foreign objects, from the International Electrotechnical Commission's standard IEC; the first marking number...
2024-07-10
The need for correct insertion and removal forces for connectors greatly affects worker stress and productivity. When lower pound forces are available to create proper contact, the worker's task may b...
2024-07-10
Choosing the right electronic connector product for a particular application or project may not be as easy as it seems. There are many different types of connectors ranging from power connectors to PC...
2024-07-10
Automatic terminal machine as the electric power industry, electrical industry harness, automotive industry processing of important equipment, with feeding, cutting, stripping and pressing the end of ...
2024-07-10
Wire stripping The accuracy of wire stripping is directly related to the entire automotive wiring harness process of the production schedule, once the error, especially the open wire size is short or ...
2024-07-10
If you often purchase connectors, I believe that you must know how complex the types of connectors, but not only is the connector this big category of complexity, even underneath it a FFC connector pr...
2024-07-10
Terminal connecting wire from the use of point of view, should achieve the function is: contact parts should be conductive place must be conductive, reliable contact. Insulated parts should not conduc...
2024-07-10
The first station in wire harness production is the wire opening process. The accuracy of the open wire process is directly related to the entire production schedule, once the error is especially shor...
2024-07-10
The wire connector is a socket connected to the wire harness, all the sensing terminals use a dedicated interface, the connection between the control computer ECU and all external components is throug...
2024-07-10
Many will intend to customers, they buy most of the channels through wholesale, wholesale is through a variety of manufacturers to take goods, for the customer, the purchase of the cost of some more, ...
2024-07-10
Medical wire processing is completed after the need to test to confirm the processing of medical wire to meet the requirements of the use of medical different parts of the different harness requiremen...
2024-07-10
Some users burned out the motor in the process of electronic wire beam processing, but do not know what causes it. The following small series will analyze the reason. If a good wire harness is not tig...
2024-07-10
With the modern automobile safety, comfort and environmental protection requirements continue to improve, the number of circuits on the car and electricity consumption increased significantly, thus ma...
2024-07-10
Both ends of the terminal connection line have holes can be inserted, you can arbitrarily select the number of wires and spacing, so that the connection is more convenient and faster, greatly reducing...
2024-07-10
Medical harness manufacturers in the processing of wire harnesses, whether it is the selection of materials or open line, processing and testing and other aspects have strict control standards, especi...
2024-07-10
In industry, many times electronic connectors are used, and if the connector is placed in a harsh and humid environment, it will corrode as it changes over time and will lead to more undesirable probl...
2024-07-10
Nowadays, equipment manufacturers produce more and more products using the connector wiring method, and the traditional hard-wired wiring method why will be replaced? Because the connector products af...
2024-07-10
When connecting the JST connector, the pins have to be applied with absolute force to open, but it is easier when separating. Therefore, it is judged that the JST connector should be connected with mo...
2024-07-10
FPC connectors are mainly used in a variety of digital communication products, portable electronic products, computer peripherals, measuring instruments, automotive electronics and other fields, such ...
2024-07-10
We all know that the terminal design precision, the slightest touch will lead to deformation, this deformation, light will lead to assembly difficulties, serious will cause poor electrical performance...
