2024-09-05
Connectors as an important part of the electronic components industry, the surface of most of them have a special layer of plating, so what is the significance of this special layer of plating? It not...
2024-09-05
Because the connector products are extremely high efficiency, so that both production and life have a strong dependence on it, especially for the modernization of society, a variety of equipment and t...
2024-09-05
Wire and cable on the flame retardant problem is generally used in the insulation, sheath, filler and other organic materials, add halogen (F, C1, Br, etc.) containing halogenated and add metal oxides...
2024-09-05
In order to improve the service life of the connector, reduce costs, we usually use a variety of methods to avoid loss, should the majority of user requirements, how to enhance the service life of the...
2024-09-05
Industrial automotive connectors and hard wiring belong to two completely different products, but because of its two are used in wiring above, and therefore often put together for comparison, after a ...
2024-09-05
In our daily life, can use AMP automotive connectors in a lot of places, I do not know whether you have used poor quality AMP connectors, once the use of poor quality AMP connectors in the equipment, ...
2024-09-05
First, the characteristics of fiber optic cable 1. Compared with the cable, the structure of fiber optic cable is ideal: small outer diameter, large capacity per unit cross-section, light weight, good...
2024-09-05
1. Connector type; connector type is the first thing we need to consider when selecting the connector, the connector type determines the use of which terminals and the number of conductive terminals. ...
2024-09-05
Communication cables and electronic wires are completely opposite of the structure of the characteristics: 1. Communication cable insulation structure most of the air and dielectric combination of ins...
2024-09-05
We need to take into account a lot of factors when choosing a connector, including environmental factors is a more important aspect, including temperature, humidity, air pressure and so on. Different ...
2024-09-05
1. Selection of metal hydrate as a fuel retardant, relying on dehydration and heat absorption reaction to inhibit the generation of flammable substances, to isolate the oxygen with its surface product...
2024-09-05
Mechanical properties of the connector, simply put is the connector insertion and extraction strength of the definition of the range, each connector insertion and extraction force size is based on the...
2024-09-05
Misplugging is part of the staff in the daily operation, because of a moment of negligence caused by the behavior of the action. Once the misplugging situation will not only lead to equipment can not ...
2024-09-05
Connector is generally made of what material? Usually by the external shell, insulation materials and contact materials of the three parts of the joint composition of the connector shell is often refe...
2024-09-05
1. Conductor: The conductor is stranded from copper or aluminum single wire, the conductor below 800mm2 cross-section using die-pulling tightly compressed round stranding process, with a smooth surfac...
2024-09-05
First is the precision production technology: this is mainly for those small distance, thin thickness of the connector production, it can ensure that in the ultra-precision production category, to ach...
2024-09-05
The main structural components of a circular connector include four main parts: the shell, the contacts, the insulator, and the attachments. In the connector design, in order to meet the rated current...
2024-09-05
Circular cable connector burned out causes, if the connector inside the water or insulation material aging, then it is easy to short-circuit phenomenon, resulting in overheating in the plug when plugg...
2024-09-05
Wire and cable materials account for 70% to 85% of the total cost of wire and cable products, therefore, by strengthening management, improve the process, reduce material consumption on the production...
2024-09-05
When designing connectors, you may encounter a variety of problems such as size, shape, material and so on. Let everyone know more about the connector as an electronic component. As we all know, Molex...
