2024-09-05
I. For different environments of installing and storing wire and cable, we summarize the following 6 points of attention: 1. Under the eaves: cables should only be used when the cable is in direct sun...
2024-09-05
1. First of all, first understand the product itself, high-density, high reliability, small size products, the use of stranded flexible pin (twisted pin), wire cross-section suitable for 0.1mm2 ~ 0.15...
2024-09-05
How to choose the accessories of YMG waterproof aviation plug? Customers usually forget to choose the accessories after choosing the aviation plugs and sockets, which is not well considered. The envir...
2024-09-05
Explosion-proof electrical connectors are generally round in shape, divided into fixed and mobile. Corrosive environment generally use stainless steel materials, plus hard plating treatment, use in ha...
2024-09-05
1. Copper and aluminum monofilament drawing: cable commonly used copper, aluminum rods, at room temperature conditions, with one or more wire drawing machine to pull the die hole, so that its cross-se...
2024-09-05
High-pressure, high-temperature vacuum sealing connector is how to do? To achieve high temperature according to existing technology is not a big problem, with the development of science and technology...
2024-09-05
Servo motor wiring harness is the connection line, only it is servo-specific, not easy to break, good shielding is not easy to external interference. Because the encoder voltage of the servo motor are...
2024-09-05
When circular electrical connectors are terminated, the operator shall carry out termination and inspection in strict accordance with the termination specifications or requirements of the termination ...
2024-09-05
The insulating material of cross-linked cable is XLPE, whose base material is PE + DCP (cross-linking agent) and other ingredients, while the cross-linking process is through the linear molecular stru...
2024-09-05
With people's comfort, economy, safety requirements continue to improve, the types of electronic products in the car is also increasing, the automotive wiring harness is more and more complex har...
2024-09-05
Often encountered such customers, the telephone connection to inquire about the price, the technical requirements have not said clearly, pop "pop" phone hung up. Ask what is the reason, said...
2024-09-05
1. found that the aviation plug surface has dark red spots, very hot to touch, should be disconnected from the power supply, dismantle the previously welded power cord and unscrew the inner conductive...
2024-09-05
1. High-speed copper cables with high current-carrying capacity: due to the low resistivity, the same cross-section of copper-core cable resistivity than the aluminum-core cable acceptable current-car...
2024-09-05
3, aviation plug plating to help improve electrical performance: the optimization of electrical performance can be considered from the following aspects, namely, the control of the already existing an...
2024-09-05
They are not the same implementation of standards: 1. explosion-proof implementation of GB3836.3 2. increased safety implementation of GB3836.2 3. non-sparking implementation of GB3836.8, specificatio...
2024-09-05
High-quality electronic wire harnesses are required to be manufactured through a rigorous processing process. In addition, in the processing of electronic wire harnesses need to pay attention to the p...
2024-09-05
How to distinguish GJB599 round aviation plug series? There are four series, all conform to GJB599A (MIL-DTL-38999K). The following is a brief introduction: 1. They are named differently GJB599I aviat...
2024-09-05
The servo harness is going to be an AC servo. Therefore its power plug and general three-phase multi-threaded motor is no different. Power plug from the Yaskawa robot servo harness drive power module ...
2024-09-05
J30J micro rectangular electrical connector products have been selling well in the market, the product is characterized by the main small, the number of cores, plugging and unplugging is convenient, i...
2024-09-05
Mitsubishi wiring harness in the whole process of operation, will be due to a variety of reasons and problems. Common problems include poor contact with the connector phenomenon, short circuit in the ...
