Categorization：Harness Component
As laptops, display devices, intelligent terminals, industrial electronics, and high-performance devices continue to develop towards slimming down and high integration, the internal connection space of devices is constantly being compressed, while the number of high-speed signal channels is increasing. The ultra-fine coaxial cable forms a relatively complete coaxial transmission path through the central conductor, insulating medium, and outer shielding structure, balancing signal transmission and shielding needs under a smaller wire diameter, and is therefore particularly suitable for internal wiring of high-density electronic devices. The I-PEX 82693-100B-01-D introduced this time belongs to the CABLINE®-VS II series 30Pin ultra-fine coaxial cable assembly, corresponding to Micro-Coaxial Cable, 40AWG, 100MM, and 1-1 structure. The documentation explicitly lists 82693-100B-01-D as a 30Pin, 40AWG, 100mm, 1-1 cable assembly. At the same time, the same series also has products with different lengths and 1-N structure, so these parameters together constitute an important identification basis for this model. For engineers, this structure is conducive to multi-route signal concentration wiring within a limited space; for procurement personnel, it means that when making alternative procurement, they cannot solely judge based on "30Pin ultra-fine coaxial cable assembly," but need to check the specifications, length, and wiring structure of the wire materials simultaneously.
The performance advantages of extremely thin coaxial cables essentially come from their coaxial transmission structure and shielding design. Compared to ordinary loose wires, extremely thin coaxial cables can utilize the outer shielding structure to form a clearer signal transmission environment, which helps to reduce external electromagnetic interference and mutual influence between signals in high-speed signal applications; at the same time, the use of 40AWG specification can further reduce the space occupied by the cable bundle while meeting connection requirements. For high-density connection solutions like I-PEX CABLINE®-VS II, the cable is not working in isolation; the connector is also directly related to the mechanical and electrical performance of the entire system. The connector model used at the end of this type of cable is 20847-030T-01, which is defined in the accessory materials as CABLINE-VS II 30Pin Plug Housing (plug plastic body), with a corresponding weight of 62.931mg. Therefore, the actual advantages of 82693-100B-01-D can be understood as a comprehensive performance of 40AWG extremely thin coaxial cable + 30Pin high-density connection + matching connector + 1-1 line position structure. For engineers, this combination is beneficial to achieve multi-channel connections in compact spaces; for purchasers, it is necessary to pay attention to the consistency of the entire cable assembly rather than comparing the price of a single cable or connector.
For the selection and compatibility of I-PEX 82693-100B-01-D-01, engineers and purchasing personnel are recommended to first confirm the core conditions of 30Pin, 40AWG, 100MM, 1-1, Micro-Coaxial Cable, and further verify the matching relationship between the cable end connector 20847-030T-01 and the actual device end. The attached data indicates that the 30Pin, 40AWG, 1-1 structure also corresponds to 82694-100B-01-D (200mm) and 82695-100B-01-D (300mm), while the 30Pin, 40AWG, 100mm products also include models such as 82188-100B-02-D with 1-N structure. This means that when carrying out domestic substitution, even if the pin count and cable length are consistent, it cannot be directly assumed that the product is fully compatible. It is necessary to further confirm the 1-1 wire position definition, pin correspondence, connector model, cable structure, termination process, and internal assembly dimensions of the device. Our company specializes in the production and manufacturing of ultra-thin coaxial cables and can provide I-PEX 82693-100B-01-D compatible cable solution. We can match and develop ultra-thin coaxial cables, connectors, cable length, wire position definition, and overall cable structure according to customer engineering drawings, samples, and actual application requirements, providing product support for engineering verification, sample trial production, domestic substitution, and bulk procurement.
The I-PEX 82693-100B-01-D embodies not just "thinner wire material," but a complete connection approach for high-density electronic devices: achieving cable miniaturization through 40AWG Micro-Coaxial Cable, meeting multi-channel signal requirements with 30Pin high-density connections, and combining it with the 20847-030T-01 cable end connector and 1-1 line position definition to form a complete cable assembly. The documentation clearly lists the 82693-100B-01-D as a CABLINE-VS II 30Pin, 40AWG, 100mm, 1-1 ultra-thin coaxial cable assembly, while the 20847-030T-01 corresponds to the CABLINE-VS II 30Pin Plug Housing.
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
