2026-09-08
I-PEX 81421-100B-02-D This product belongs to the CABLINE®-VS 30Pin ultra-thin coaxial cable assembly, using 30 AWG#40, 50Ω Micro-Coaxial Cable (ultra-thin coaxial cable), with a cable assembly length...
2026-09-08
I-PEX 82189-100B-02-D belongs to the CABLINE®-VS 30Pin Harness, using a 30-core AWG#40, 50Ω Micro-Coaxial Cable, with a length of 100mm, Pin A
2026-09-08
I-PEX 83063-100B-01-D is a CABLINE®-VS series 20PIN ultra-thin coaxial cable assembly, using AWG #40, 50Ω Micro-Coaxial Cable (ultra-thin coaxial cable), with a standard length of 30
2026-09-07
I-PEX 83062-100B-01-D core specifications include 20Pin, AWG#40, 200±5mm, 50Ω characteristic impedance, and 1-1 wire position definition, with the cable end using 20454-220T 20Pin Plug Housin
2026-09-07
I-PEX 83061-100B-01-D corresponds to the CABLINE®-VS 20P HARNESS engineering drawing. This product uses 20 Micro-Coaxial Cables with extremely fine wires, cable specification AWG#40, characteristic im...
2026-09-07
I-PEX 82909-100B-02-D belongs to the CABLINE®-VS 20P HARNESS ultra-fine coaxial cable harness solution. According to the corresponding engineering drawings, this product uses 20 Micro-Coaxial Cable ul...
2026-09-07
I-PEX 82067-100B-02-D, its cable end uses the 20454-220T connector, with a connector specification of 20PIN, 0.5MM pitch. For engineers, the 20PIN solution can complete multi-channel signal connection...
2026-09-07
I-PEX 82908-100B-02-D, belongs to CABLINE®-VS 20Pin ultra-fine coaxial cable assembly, using AWG#40, 50Ω Micro-Coaxial Cable, cable assembly length of 100±5mm, wire end used
2026-09-07
I-PEX 82987-100B-01-D corresponds to CABLINE®-CA 60P HARNESS, using a 60Pin Micro-Coaxial Cable, AWG#40, 50Ω specification, with a cable length of 200.
2026-09-07
When designing high-speed MIPI applications with I-PEX 82988-100B-01-D, it is essential to pay close attention to the matching relationship between the 60Pin, AWG#40, 50Ω, 300MM, 1-1 wire sequence, an...
