2026-09-10
I-PEX CABLINE®-CAL series adopts a 0.4mm pitch, horizontal insertion structure, with a mating height of 0.73±0.07mm, supports 30Pin and 40Pin, and can be compatible with AWG38, AWG40, AWG42, AWG44, et...
2026-09-10
I-PEX CABLINE®-CAL uses a 0.4mm pitch, horizontal insert structure, with a mating height of 0.73±0.07mm. Official data shows that both 30Pin and 40Pin can be used, and it supports AWG38, AWG40, AWG42,...
2026-09-10
I-PEX 82437-100B-02-D belongs to CABLINE®-CAL 30P HARNESS, using a 30Pin, 0.4mm Pitch connection structure, with wire material of AWG#40, 50Ω Micro-C coaxial cable
2026-09-10
I-PEX 82873-100B-02-D, do not mix the 30Pin 20777-030T-01 with the 40Pin 20777-040T-01. Even if they look similar, they may not meet the actual assembly requirements.
2026-09-10
I-PEX 83066-100B-01-D corresponds to CABLINE®-VS 50Pin cable harness scheme, the cable end connector is 20454-250T, length is 300MM, cable material is AWG#40, 50Ω Micro-Coaxial
2026-09-10
I-PEX CABLINE®-VS series adopts a 0.5mm Pitch, horizontal insertion structure, and mechanical lock, with the official reference transmission performance of 32Gbps/lane NRZ; its reference test uses a 4...
2026-09-10
I-PEX 83064-100B-01-D, core specifications are 50Pin, 0.5mm Pitch, AWG#40, 50Ω, 100mm, 1-1; wire end connector model marked for your project is 20454-250T, corresponding to I-PEX
2026-09-10
I-PEX 82911-100B-02-D is a CABLINE®-VS series 50Pin ultra-thin coaxial cable assembly. The technical drawings indicate that it uses AWG#40, 50Ω Micro-Coaxial Cable, and the cable assembly length is 30...
2026-09-10
The core features of I-PEX 82450-100B-02-D include 50Pin, AWG#40, 50Ω Micro-Coaxial Cable, 200MM length, and 20454-250T series connectors.
2026-09-10
I-PEX 82910-100B-02-D belongs to the CABLINE®-VS 50Pin ultra-thin coaxial cable solution. According to the corresponding PDF material, this cable assembly uses 50 AWG#40 Micro-Coaxial Cable, with cabl...
