2026-09-17
I-PEX 82882-100B-02-D is an example, it belongs to CABLINE®-SS 14Pin ultra-thin coaxial cable assembly, using 14Pin, 0.4mm Pitch, AWG#40 Micro-Coaxial Cable,
2026-09-17
I-PEX 82441-100B-02-D is a CABLINE®-SS series 14PIN ultra-thin coaxial cable assembly, the engineering drawing corresponds to wire material of 14 AWG#40, 50Ω Micro-Coaxial Cable, total length of 200.0
2026-09-17
I-PEX 82881-100B-02-D This product belongs to the CABLINE®-SS series 14Pin ultra-thin coaxial cable束，using Micro-Coaxial Cable，the official specifications of the cable material correspond to 40AWG，the...
2026-09-16
I-PEX 83009-100B-01-D belongs to CABLINE®-SS 10P HARNESS. The official I-PEX product page lists this model as 10Pin, Micro-Coaxial 40AWG, 300mm, 1-1
2026-09-16
I-PEX 83008-100B-01-D corresponds to I-PEX CABLINE®-SS 10P HARNESS. According to the official PDF drawings of this model, the total length of this harness is 200.0±5.0mm, using 10 Micro-Co
2026-09-16
I-PEX 83007-100B-01-D belongs to the CABLINE®-SS 10P HARNESS, and the model listed on the official product page is 100mm, 1-1 wire sequence. According to the corresponding 83007C0 engineering drawing,...
2026-09-16
I-PEX 82880-100B-02-D model belongs to CABLINE®-SS 10P ultra-thin coaxial cable assembly, with a cable length of 300MM, wire position defined as 1-N, using 10 AWG#40, 50Ω Micro-Coaxial cables
2026-09-16
I-PEX 82440-100B-02-D belongs to the CABLINE®-SS series 10Pin ultra-thin coaxial cable assembly, with a length of 200MM, and the connector model used at the cable end is 20373-R10T-06.
2026-09-16
When considering alternative solutions for I-PEX 82879-100B-02-D, the basic confirmation items include 10Pin, AWG#40, 100mm, 1-N, 20373-R10T-06, and impedance requirements, and then combine them with ...
2026-09-16
I-PEX 83006-100B-01-D belongs to CABLINE®-CX II With Cover 40Pin ultra-thin coaxial cable assembly. The official specifications list this model as 40Pin Micro-Coaxial, AWG46, length
