2026-09-16
I-PEX 83005-100B-01-D is a very typical AWG46 ultra-fine coaxial cable assembly. According to the 83005 engineering drawing you provided, this cable assembly uses 40 AWG#46, 50Ω Micro-Coaxial wire mat...
2026-09-16
I-PEX CABLINE®-CX II With Cover, for example, the official page lists the reference transmission speed as 5 Gbps/lane NRZ, and lists USB 3.1 Gen1, V-by-One HS 1.4
2026-09-16
I-PEX's CABLINE®-CX II With Cover utilizes a 0.25mm contact pitch and a 40Pin structure, with a mating height of 0.83±0.17mm, a maximum height with the shielded cover of 1.00mm, itself designed for sp...
2026-09-16
As a clear reference model, I-PEX 82878-100B-02-D is checked item by item for key parameters such as connector structure, 40PIN quantity, 0.25MM spacing, 46AWG ultra-thin coaxial wire, 200mm length, w...
2026-09-15
I-PEX 82877-100B-02-D, the official documents clearly specify the reference transmission capability as 5 Gbps/lane, and it corresponds to reference applications such as USB 3.1 Gen 1. Therefore, engin...
2026-09-15
I-PEX 83057-100B-01-D ultra-thin coaxial cable assembly, belongs to CABLINE®-UX II 50Pin 1-1 cable assembly, with a nominal length of 300MM, adopting Micro-Coaxial Cable solution. I-PEX official model
2026-09-15
I-PEX 83056-100B-01-D belongs to CABLINE®-UX II 50Pin, 200mm, 1-1 ultra-thin coaxial cable assembly, the original design uses AWG#46, 50Ω Micro-Coax.
2026-09-15
I-PEX CABLINE®-UX II adopts a 0.25mm contact pitch and a vertical cable exit structure, supporting 30/34/40/50PIN, and is designed for internal connections in thin and space-limited devices, therefore...
2026-09-15
I-PEX 82447-100B-02-D uses a 50-core AWG #46, 50Ω Micro-Coaxial Cable, with both ends compatible with CABLINE®-UX II structure, the wire position defined as 1-N, corresponding to a 300mm standard cabl...
2026-09-15
I-PEX 82659-100B-02-D, with its 200mm length and 50Ω AWG#46 Micro-Coaxial structure, is suitable for high-speed signal interconnects within small electronic devices; the 5 Gbps/lane NR
