2026-09-23
I-PEX's CABLINE®-UA II employs a 0.3mm Pitch, vertical right-angle structure, and is designed for space-limited, high-speed signal, and EMI shielding applications; the reference standards listed in th...
2026-09-23
I-PEX 83034-100B-01-D employs a 32Pin, 100mm, 1-1 structure with AWG#44 Micro-Coaxial Cable, and is paired with the 20497-032T-30 wire harness connector and 0.3mm grade high density
2026-09-23
I-PEX 82896-100B-02-D is a 32Pin, 300mm, 1-N structured Micro-Coaxial Cable Harness, using AWG#44, ultra-fine 50Ω coaxial wire material.
2026-09-23
I-PEX 82148-100B-02-D is a 32P ultra-thin coaxial cable assembly for the CABLINE-UA II system, with a matching cable end connector of 20497-032T-30, 32PIN, 0.3MM Pitch.
2026-09-22
I-PEX CABLINE®-UA II now supports AWG42/AWG44/AWG46 Micro-Coax, and has demonstrated the wire-through application of coaxial cables with an outer diameter of about 0.29mm, indicating that ultra-fine w...
2026-09-22
I-PEX CABLINE®-UA II series adopts a 0.3mm terminal pitch and Vertical Right Angle structure, with a mating height of approximately 1.27±0.1mm, and provides 26Pin, 32Pin, 40Pin, and 50Pin options.
2026-09-22
I-PEX CABLINE®-UA II series, with connectors featuring a 0.3mm Contact Pitch and Vertical Right Angle structure, officially lists 5Gbps/lane NRZ as the reference transmission capability
2026-09-22
This kind of I-PEX 83031-100B-01-D 26PIN, 0.3MM Pitch, 44AWG, 100mm CABLINE®-UA II ultra-thin coaxial cable assembly must meet the space layout requirements of miniaturized equipment while also focusi...
2026-09-22
For I-PEX 82894-100B-02-D such 26P, 44AWG ultra-fine coaxial cable bundles, truly reliable bend testing is not simply increasing the number of bending cycles, but establishing a testing method corresp...
2026-09-22
I-PEX 82893-100B-02-D belongs to the CABLINE®-UA II 26Pin ultra-thin coaxial cable assembly. The official model information of I-PEX indicates that this evaluation cable assembly is 26Pin Micro-Coaxia...
